10 Wrong Answers To Common Repairs To Upvc Windows Questions: Do You Know The Right Ones?
10 Wrong Answers To Common Repairs To Upvc Windows Questions: Do You Know The Right Ones?
Blog Article
Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.
It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to ensure that your windows are in good working order.
Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.
Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.
It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.
To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. After that, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you are happy with the fit of your window, you can tighten screws to keep them in place.
If you aren't able to move the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.
UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism wears out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism into position.
3. Water Leaks
It is crucial to take action if wake up every morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking used previously may require removal before a new layer can be put on. When it is time to uPVC repair, you should be careful not to over-caulk. This will only make your window more difficult to clean and lower its energy efficiency.
It is important to check that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.
Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.
If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation check here of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open, or if it blows open with a breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.
Like any mechanical component hinges are prone to be damaged over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps you hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.
The problem can be caused by opening the window incorrectly or by a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.
Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear may become displaced, which will cause a gap to form where the sash joins the frame. They can be repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them re-aligned or replaced. Second, the interlock can be misaligned. It is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.
The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.
One of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking cold air.
The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.